Maintenance FAQ

Which clamp jaws do I need?
The two jaws are slightly different so you will have to match the jaw colors between the black and red. Ultimate stands are compatible with our current mode...
Wed, 25 Mar, 2020 at 11:08 AM
Are the red clamp jaws and black clamp jaws interchangeable?
Due to the differences in shape and hardware supplied with replacement clamp jaws, the two are not interchangeable. Please make sure your specify which colo...
Thu, 12 Dec, 2019 at 2:05 PM
Is my older Ultimate Stand compatible with your small parts?
The answer is sometimes. When we purchased the bicycle division from Ultimate Support a little over a decade ago we  changed a few things. While the black a...
Tue, 10 Mar, 2020 at 1:53 PM
How come the Ultimate generation telescoping collars and leg fittings are no longer available? Do you make any compatible replacement parts that will work?
When Feedback Sports acquired the line of bicycle wash and work stands in the early 2000’s, only a limited number of the Ultimate collars and fittings remai...
Thu, 12 Dec, 2019 at 2:25 PM
Removing the head off of your repair stand
Using a small pokey tool remove the red button Use an 8mm socket or Phillips head to remove the  stop-screw Un-thread the tri knob Remove the head and cl...
Tue, 18 Feb, 2020 at 3:30 PM
Can I convert my Pro Elite into a Sprint stand or my Sprint stand into a clamp style repair stand?
First off, that’s a great question and a great idea. Unfortunately, the two stands are not modular and cannot be swapped back and forth.  The Sprint and the...
Thu, 12 Dec, 2019 at 2:06 PM
With three legs on the base of my repair stand, how do I position them for the most stable configuration to hold my bike?
If you’re looking down at the base of your stand with the clamp assembly folded out for use, it is advisable to position one of the legs angled slightly for...
Thu, 12 Dec, 2019 at 2:22 PM
Is it safe for my wash and work stand to get wet?
Yes, because Feedback Sports products are made with premium materials, they are designed to withstand the elements. As with any product being used as a tool...
Thu, 12 Dec, 2019 at 2:24 PM
Can I put two clamp heads on my repair stand?
Unfortunately we cannot recommend that you attempt to install a secondary clamp assembly on your stand. By doing so, you are changing the balance point of t...
Thu, 12 Dec, 2019 at 2:19 PM
What is the difference between your repair stands?
The short answer is speed and convenience. Our entry level stands will have simple spinner knobs that will screw and unscrew the jaws, while our higher leve...
Tue, 14 Jan, 2020 at 2:53 PM